FRITZ!WLAN Repeater 300E
10
Connecting FRITZ!WLAN Repeater with a WLAN Base Station
3
Connecting FRITZ!WLAN Repeater with a WLAN Base
Station
Connect the FRITZ!WLAN Repeater with the FRITZ!Box or an-
other WLAN base station whose radio network the
FRITZ!WLAN Repeater is to extend.
You can also register two or more FRITZ!WLAN Repeater at
your WLAN base station.
3.1
Establishing a Connection Using WPS
Using WPS (Wi-Fi Protected Setup), you can establish quickly
and easily a secure WLAN connection. You can use WPS if the
following prerequisites are met:
Prerequisites
•
The WLAN base station must support WPS.
The following FRITZ!Box models, for instance, support
WPS: FRITZ!Box Fon WLAN 7390, 7270 and 7240,
FRITZ!Box 6360 Cable, FRITZ!Box WLAN 3370 and 3270.
•
WPS must be enabled in the WLAN base station.
WPS is enabled upon delivery in the latest FRITZ!Box
models. In older FRITZ!Box models, enable the WPS
method in the user interface under “WLAN / Security /
WPS Quick Connection”.
•
The WLAN base station must support the WPA or WPA2
encryption standard.
•
The SSID (radio network name) of the WLAN base station
must be set to “visible” (announced). The SSID of a
FRITZ!Box is visible upon delivery.
•
If a MAC address filter is active in your WLAN base sta-
tion, the MAC address of the FRITZ!WLAN Repeater must
be entered there as an exception. You can also disable
the MAC address filter until the connection to the
FRITZ!WLAN Repeater is established.
