FRITZ!WLAN Repeater 300E
26
No Connection with the WLAN Base Station
The encryption of your WLAN base station is set to “WEP” or
“non-encrypted”. WPS can only be used with WPA/WPA2 en-
cryption.
Set up encryption with WPA/WPA2 in the user interface of
your WLAN base station.
The radio network name (SSID) at your WLAN base station is
set to “not announced”.
Set the SSID to “visible”.
The SSID must be visible to establish a connection using
WPS. Once the connection has been established you can
reset the SSID of the WLAN base station back to “not
announced”.
A different WLAN radio network in the vicinity of the
FRITZ!WLAN Repeater and the WLAN base station is causing
interference.
Test a different radio channel. If possible, set automatic radio
channel selection in the WLAN base station. Your
FRITZ!WLAN Repeater then will use the same channel
automatically.
Cause
Help
Cause
Help
Cause
Help
