5.
Assign a password for the user interface and click on “OK” and
then on “Next”.
We recommend leaving the AVM services for diagnostics and
maintenance of the FRITZ!Repeater enabled. You can change
this setting at any time.
6.
Enable the connection type “LAN bridge” and click on “Next”.
7.
Specify whether the FRITZ!Repeater should obtain its IP address
automatically. Enable “Configure the IP address manually” only
if you have disabled the DHCP server of the router.
8.
Click on “Next”.
9.
Configure the wireless LAN settings for the FRITZ!Repeater. So
that wireless devices can switch automatically from the router
to the FRITZ!Repeater (and back), set the same encryption and
the same network key as in the router.
10. Click on “Next”.
11. Plug the FRITZ!Repeater into an outlet where you would like to
use it.
12. Connect the FRITZ!Repeater to the router using a LAN cable.
Connecting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
28
FRITZ!Repeater 1200
