Fritz!Box 6890, Конфигурация и эксплуатация

Страница: 138 / 281

Kind of Change Need
Reduce If there are fewer network devices, the address
range can be reduced. Example for a smaller
range: 192.168.178.20 - 192.168.178.120
Move If you permanently assign the IPv4 addresses
192.168.178.2 - 192.168.178.49 to network
devices, but want to maintain a DHCP address
range of the same size, then you can shift the
DHCP address range, for instance to the range
192.168.178.50 - 192.168.178.230
Rules
Only one DHCP server may be active in a network.
Preparing Network Devices for DHCP
For the IP address to be assigned by the DHCP server, the “Obtain an IP
address automatically” must be enabled in the IPv4 settings of the net­
work devices;
see Obtaining an IP Address Automatically, page 144 .
When a network device registers with the FRITZ!Box, it receives an
IPv4 address from the DHCP server. Every time the network device is
restarted, the DHCP server assigns it an IP address again.
Always Assigning the Same IPv4 Address
You can specify that the DHCP server always assigns the same IPv4
address to network devices. This option can be enabled under “Home
Network / Network / Network Connections” in the detailed settings of
the network devices.
Disabling the DHCP Server
You can disable the DHCP server of the FRITZ!Box.
User Interface: Home Network Menu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
138 FRITZ!Box 6890