manualshive.com logo in svg

Fritsch PULVERISETTE 1 classic line, Руководство по эксплуатации, Страница: 19 / 56

Поделиться
Скачать
Fritsch PULVERISETTE 1 classic line Скачать руководство пользователя страница 19

4.4  Ambient conditions

WARNING!
Mains voltage!
– The device may only be operated indoors.
– The surrounding air may not carry any electrically

conductive dust.

– Maximum relative humidity 80% for temperatures

up to 31°C, linearly decreasing down to 50% rela-

tive humidity at 40°C.

n

The room temperature has to stay between 5 - 40°C.

n

Altitudes up to 2000 m

n

Degree of pollution 2 according to IEC 664.

4.5  Attaching the funnel

The Laboratory - jaw crusher is delivered with the funnel not attached.

Before operating the device for the first time, the funnel must be

attached.
1.

Take the funnel and the supplied hexagon socket screw key out of

the packaging.

2.

Remove the 4 cylinder screws and the washers with the hexagon

socket screw key.

3.

Insert the funnel into the funnel opening intended for this purpose

on the top side of the Laboratory - Jaw Crusher.

4.

Screw the funnel to the housing using the 4 previously removed

cylinder head screws and the washers.

 

Installation

 

 

- 19 -

 

Содержание PULVERISETTE 1 classic line

























































Отзывы:

Нет отзывов