Fritsch ANALYSETTE 22 NeXT, Руководство по эксплуатации

Страница: 35 / 56

DANGER!
Explosion hazard, combustible substances
– Do not use highly flammable and flammable liquids
such as alcohols, ketones and benzines etc. or any
chemicals, which contain or could break down into
chloride ions (some disinfectants, household deter-
gents and washing-up liquids), in the dispersion
unit. See
Ä
Chapter 5.1.2 ‘Selecting the liquids’
on page 27.
– After prolonged use the liquid warms up, therefore
check the temperature.
– Do not use aggressive liquids (e.g. strong acids,
concentrated salt solutions).
7.1.1 Assembly of the ultrasonic box
The ultrasonic box is attached to the wet dispersion unit as follows:
1.
The extending flat headed screws have to point in the direction of
the wet dispersion unit.
2. There are holes located on the back side of the wet dispersion unit
in which the ultrasonic box is hooked into.
3. Feed the ultrasonic box with the flat headed screws through the
large holes on the back side of the dispersion unit and let the dis-
persion unit slide down.
ð
The ultrasonic box is thereby attached to the wet dispersion
unit.
The ultrasonic box is attached as described in
Ä Chapter 5.1 ‘Wet dispersion unit’ on page 27.
Accessories
- 35 -