Fristam Pumps PM 01, Оригинальное руководство пользователя

Страница: 28 / 38

/ / PM POWDER MIXER / / /
28
9.2 Replacement Parts
Use of replacement parts that are not approved by Fristam can lead to serious personal inju-
ry and material damage. If you have any questions regarding approved replacement parts,
please contact
Fristam .
Fristam registers all shipped powder mixers. For ordering Fristam replacement parts, you re-
quire the following information:
1. Order number
2. Serial number of powder mixer (see rating plate on powder mixer frame)
3. For pumps: pump serial number (see rating plate or number stamped into pump)
4. Replacement parts and materials designations (see Order-Related Documents in at-
tached documents)
10 Appendix
10.1 Specifications
Detailed specifications for the powder mixer are given separately in the system documenta-
tion.
10.1.1 Tightening Torques
Tightening Torques for Screws and Nuts
Material: Steel, Strength Class: 8.8
Material: Steel, Strength Class: 70
10.1.2 Noise Emissions
The noise emissions are dependent on the pumps used, the shaker, and the size and fill level
of the funnel.
The specified values apply to operation of the powder mixer at the best efficiency point
(please also see pump characteristic curves and specifications in the attached operator's
manuals).
The noise level can differ greatly at other operating points.
Thread M8 M10 M12 M16
Tightening Torque [Nm] 25 49 85 210
Thread M8 M10 M12 M16
Tightening Torque [Nm] 17.5 35 62 144
Size Noise Level
[dBA]
PM01 80
PM02 81
PM03 82
PM04 84
PM05 87
Table 7 Noise emissions without operation of a vibratory motor