Fristam Pumps PM 01, Оригинальное руководство пользователя

Страница: 14 / 38

/ / PM POWDER MIXER / / /
14
Fig. 9 Control cabinet
3.6 Vibratory Motor (Optional)
The vibratory motor causes the funnel to vibrate and facilitates uniform powder flow to the
bottom of the funnel.
If the vibratory motor is activated, it will run in specified switching cycles or switch off.
No. Element Design Function
24 Switch for shear pump
[S3] Rocker switch with indicator
light Used to switch voltage supply for
the shear pump frequency con-
verter on and off
25 Switch for FZ pump [S2] Rocker switch with indicator
light
Used to switch FZ pump on and off
26 Vibratory motor switch
"Vibrating" [S4] Selector switch with set
positions or selector dial Used to switch external vibrator on
and off
27 Fault indicator "Fault"
[L1] Indicator light Lights up when faults occur (see
"Faults")
28 Emergency stop button Latching palm button Used to turn off the powder mixer
in an emergency
29 Main switch [S1] Selector dial Used to turn on powder mixer
30 Set point potentiome-
ter (optional) Control dial Used to adjust the set point for
shear pump speed
31 Graphics and control
terminal for frequency
converter (example) Panel with LCD, buttons,
and controls Used to control the frequency con-
verter or start the shear pump
Table 1 Control and display elements on control cabinet
24 25 26 27
30
28 31
29