Frigomat GX2 A, Руководство по эксплуатации и обслуживанию

Страница: 57 / 124

ENGLISH - 26
We suggest using the following sanitising
solution:
Ecolab P3 Topax-san
(4% dilution = 200 ml every 5 litres of water).
•
Pour the maximum admitted load of cold drinking
water into the machine to rinse the surfaces which
were just treated with the sanitiser.
•
Drain the rinse water and turn the machine off.
•
When pre-washing is over, all the removable parts in
contact with the product must be disassembled and
sanitized in a separate tub.
SANITIZING REMOVABLE PARTS
PREPARATION OF WASHING TUB
•
Wash your hands well and/or wear disposable
gloves.
•
Fill a clean tub with a sufficient amount of drinking
water at approximately 50°C and the sanitizer.
•
Prepare the supplied brush and the OR disassembly
device and immerse them in the solution.
REMOVING AND CLEANING COVER
•
Slide the hinge pin out and remove the lid.
•
Emerge the previously disassembled components
into the tub with the sanitizer and brush the surfaces
with care. Pay special attention to the surfaces in
direct contact with the product.