Frigomat G20, Инструкция по эксплуатации и техническому обслуживанию

Страница: 48 / 162

23 - ENGLISH
RINSING AND DRYING

Wash your hands well and/or wear disposable latex
gloves.

Remove all the components which were previously
disassembled, brushed and immersed from the
sanitizing tank.

Rinse them with plenty of cold drinking water, making
sure to remove all possible leftover sanitizing solution.

Place the rinsed components on a clean table and let
them dry in the air.
DO NOT use rags, sponges or anything else to dry the
components. Make sure no dust or other impurities
come into contact with the sanitized surfaces while
they are drying.

Also carefully rinse the fixed parts of the machine
which were treated with the sanitizing solution
(cylinder, drive shaft, etc.)

When all the components are dry, put them back onto
the machine making sure the gaskets and scrapers
are in good condition.
SUBSTANCES THAT CAN DAMAGE OR DAMAGE STAINLESS STEEL (use with
caution)
Vinegar (vapors), hydrocyanic acid, oleic acid (subject to pitting), picric acid, fuming
sulfuric acid, sulfurous acid, stearic acid, Ethanol, Methanol, Acetic anhydride, bisulphate
of carbon, zinc chloride (subject to pitting) , sulfur chloride, ammonium phosphate, sodium
phosphate, calcium hydroxide, magnesium hydroxide, sodium perborate, sodium peroxide,
sodium silicate, ferrous sulfate, sodium sulfide (subject to pitting), trichlorethylene (subject
to pitting).
SUBSTANCES THAT DAMAGE corrode STAINLESS STEEL (not to ever use)
Hydrochloric acid, hydrofluoric acid, muriatic acid (commercial), sulfuric acid, sulfur
dioxide, chlorine bleach saturated (subject to pitting), Ferric Chloride (subject to pitting),
ferrous chloride, mercuric chloride (subject to pitting), nickel chloride (subject to pitting),
Gas chlorine, calcium
Hypochlorite (subject to pitting), sodium Hypochlorite, carbon tetrachloride
(subject to pitting).