Frigidaire FRT22TSEK5, Руководство пользователя

Страница: 8 / 17

8
the refrigerator control to OFF and disconnect the power. If the unit has an automatic
ice maker, turn off the ice maker and turn the water supply valve to the closed position.
Defrost and clean the interior thoroughly. Leave both doors open to prevent odor and
mold buildup. Block open if necessary.
When moving the refrigerator, follow these guidelines to prevent damage:
• Remove all food and other items from both the refrigerator and freezer
compartments. Empty the ice storage bin. Defrost and clean the interior
thoroughly.
• If a hand truck is used in moving, load the refrigerator from the side.
• Turn front rollers as far up as possible. This will protect them during sliding
or moving.
• The cabinet should be well padded and handled with care. DO NOT DROP.
If your refrigerator has an automatic ice maker, it will provide a continuous supply of
ice for normal use. The automatic ice maker is an optional accessory which may be
installed in most models at any time. Call your local dealer for installation.
After the plumbing connections have been completed, the water supply valve must
be opened. Place the ice container under the ice maker, pushing it as far back as
possible. Lower the wire signal arm to its "down" or ON position. Because of new
plumbing connections, the first production of ice cubes may be discolored or have an
odd flavor. Throw the ice away until the cubes made are free of discoloration and
taste.
Remember that water quality determines your ice quality. It is best
to connect the ice maker to water that is not soft. Softening chemicals can damage
the ice maker. If the ice maker is connected to soft water, ensure the softener is
maintained and working properly.
To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up"
or OFF position. The ice maker turns off automatically when the ice container is full.
If your model has an adjustable freezer shelf, place the shelf so the wire signal arm
will hit the ice when the ice container is full.
Ice Maker Tips
1. Ice stored too long may develop an odd flavor. Empty the container and be sure the
wire signal arm is in its "down" or ON position. The ice maker will then produce
more ice.
2. Occasionally shake the container to keep ice separated.
3. Keep the wire signal arm in its "up" or OFF position until the refrigerator is
connected to the water supply or whenever water supply is turned off.
4. Certain sounds are normal when the ice maker is operating. They are:
Motor operation
Ice being loosened from the tray
Ice being dropped into the container
Running water
Water valve opening and closing
For more information on these operations, see "Normal Operating Sounds."
Care and Cleaning
(continued)
Wire
Signal Arm
Automatic Ice Maker
5. Wash ice container in warm water with mild detergent. Rinse well and dry.