Frigidaire FRT22TSEK5, Руководство пользователя

Страница: 6 / 17

6
Shelves
Adjusting the Chilled Air Duct
Hole Cover
Air Duct
Lower portion of
air duct slides up
or down.
Air Outlet Box
Hole cover and air duct
slide into grooves on
bottom of air outlet box.
Cantilever Shelf
Shelf Adjustment
Refrigerator shelves are easily adjustable to suit individual needs. Before adjusting
shelves, remove all food. Remove and discard the shipping clips, wedged into the
cantilever rail above the shelf hook. These clips stabilize the shelves during shipping.
To adjust cantilever shelves (shelves
supported at the rear of the refrigera-
tor), lift the back of the shelf up and out.
Replace shelf by inserting hooks at rear
into slots. Lower and lock into position.
The Spillsafe™ glass shelves catch and
hold accidental spills. In some models,
the
Spillsafe™ shelves slide out for easy
access to food and fast cleaning. The
shelves slide out independently of the
cantilever bracket. Just pull front of
shelf forward. Shelf can be extended as
far as stopper will allow and is not
removable from the cantilever bracket.
INSERT CLIP
HORIZONTALLY
Remove shipping clips
Fresh Food Storage
(continued)
Adjustable Chilled Air Duct
The Chilled Air Duct, which distributes cold air to the Meat Keeper drawer, can be
adjusted to accommodate repositioning of the shelf. However, the shelf has a limited
range of positions in which the Chilled Air Duct will reach. The shelf is shipped in the
highest position and must be lowered to reach the Chilled Air Duct. Follow these
instructions:
• Remove the Meat Keeper drawer and shelf.
• Slide lower portion of air duct downward to the lowest position.
• Replace the shelf in a position above the air duct opening.
• Slide lower portion of air duct upward until the opening hits the shelf bottom.
• Insert the drawer. The air duct opening will fit between the shelf and the back
of the drawer.
The Chilled Air Duct can also switch sides, should you wish to move the split cantilever
shelf. To change sides:
• Remove the Meat Keeper drawer and shelf. Grasp the air duct near top and slide
toward you until duct is free from grooves.
• Slide off hole cover on opposite side. Insert the lip of the air duct in grooves of
new hole and slide back.
• Slide hole cover over original hole.
• Replace shelf and insert drawer.
Shelves
Wine Rack
(some models)
The wine rack stores bottles of wine, or single 2-liter plastic bottles of juice or soda
pop. To install, slide the wine rack onto the shelf with the curve facing in. To
remove, slide the wine rack out. Install on either side of a
Spillsafe™ shelf.
g05i0130
Wine Rack