Frigidaire FRT22TSEK5, Руководство пользователя

Страница: 7 / 17

7
Care and Cleaning
Damp objects stick to cold
metal surfaces. Do not touch refrigerated
surfaces with wet or damp hands.
Removing Crisper Light Shield and Bulb
To avoid damage and help
the refrigerator run as efficiently as
possible, clean the condenser and air
vents periodically.
Air Vents on Lower Access Panel
Air Vents
Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills
immediately and clean both sections at least twice a year.
Never use metallic scouring
pads, brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not wash
any removable parts in a dishwasher.
Always unplug the power cord from the wall outlet before cleaning. Turning the
refrigerator control to OFF does not disconnect power to the controls, light bulb, or other
electrical components.
Inside
Wash inside surfaces of the refrigerator and freezer with a solution of 2 tablespoons
baking soda in 1 quart warm water. Rinse and dry thoroughly.
Be sure to wring excess
water out of sponge or cloth before cleaning around the controls, light bulb or
any electrical parts.
Wash removable parts such as shelves and drawers with baking soda solution or mild
detergent and warm water.
DO NOT USE HARSH CLEANERS ON THESE SURFACES.
Rinse and dry thoroughly. Clean the door gaskets with mild suds, rinse with clear water
and wipe dry. Do not use razor blades or other sharp instruments which can scratch the
appliance surface when removing adhesive labels. Any glue left from the tape or energy
label can be removed with a mixture of warm water and mild detergent, or, touch the
residue with the sticky side of tape already removed.
DO NOT REMOVE THE SERIAL
PLATE.
Outside
Clean stainless steel front and handles with hot soapy water and a dishcloth. Rinse
with clean water and a soft cloth. Wipe stubborn spots with an ammonia-soaked
paper towel, and rinse. Cleaners made especially for stainless steel, such as Sheila
Shine, trademark of Sheila Shine, Inc., Stainless Steel Magic, trademark of Magic
American Corp., or similar products are suggested. Always follow manufacturer’s
instructions. Wash the rest of the cabinet with warm water and mild liquid detergent.
Rinse well, and wipe dry with a clean soft cloth.
Remove any dust or dirt from the front of the toe grill using a vacuum cleaner with its
dusting tool attachment. Remove the toe grill by pulling it straight out. While the grill is
removed, vacuum the backside of the grill and wipe with a sudsy cloth or sponge.
Periodically clean the condenser (black tubes and wires beneath the refrigerator, behind
the toe grill). Do not allow lint or dust to accumulate on the coils. Insert a long handled
brush or vacuum attachment between the two coils to bring the lint forward. To replace
the toe grill, line up tabs with holes and push grill straight on.
Use caution
when cleaning in the area of the coils. Surfaces there may be sharp.
The air vents on the lower access panel at the rear of the refrigerator should be cleaned
periodically. Clean the vents by using a vacuum cleaner with its dusting tool attachment.
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side
to side as this may tear or gouge the floor covering. If the refrigerator has an automatic
ice maker, be careful not to move the refrigerator beyond plumbing connections.
Replacing the Light Bulb
To replace the light bulb:
1. Unplug the refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Replace old bulb with an appliance bulb of the same wattage.
4. Remember to plug the refrigerator back in.
Vacation and Moving Tips
Short vacations: Leave the refrigerator operating during vacations of 1 to 3 weeks.
Use up all perishable items from the refrigerator section. Wrap and store other items
in the freezer. If the unit has an automatic ice maker, turn off the ice maker.
Long vacations: Remove all food and ice if you will be gone 1 month or more. Turn