Frigidaire FRT22RRHW3, Руководство пользователя

Страница: 7 / 18

7
Care and Cleaning
(continued)
To replace the toe grill, line up tabs with holes and push grill straight on.
Use caution when cleaning in the area of the coils. Surfaces there
may be sharp.
The air vents on the lower access panel at the rear of the refrigerator should be cleaned
periodically. Clean the vents by using a vacuum cleaner with its dusting tool
attachment. When moving the refrigerator, pull straight out. Do not shift the
refrigerator from side to side as this may tear or gouge the floor covering. If the
refrigerator has an automatic ice maker, be careful not to move the refrigerator
beyond plumbing connections.
Replacing the Light Bulb
To replace the light bulb:
1. Unplug the refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Replace old bulb with an appliance bulb of the same wattage.
4. Remember to plug the refrigerator back in.
Vacation and Moving Tips
Short vacations: Leave the refrigerator operating during vacations of 1 to 3 weeks.
Use up all perishable items from the refrigerator section. Wrap and store other items
in the freezer. If the unit has an automatic ice maker, turn off the ice maker.
Long vacations: Remove all food and ice if you will be gone 1 month or more. Turn
the refrigerator control to OFF and disconnect the power. If the unit has an
automatic ice maker, turn off the ice maker and turn the water supply valve to the
closed position. Defrost and clean the interior thoroughly. Leave both doors open
to prevent odor and mold buildup. Block open if necessary.
Moving: When moving the refrigerator, follow these guidelines to prevent damage:
• Remove all food and other items from both the refrigerator and freezer
compartments. Empty the ice storage bin. Defrost and clean the interior
thoroughly.
• If a hand truck is used in moving, load the refrigerator from the side.
• Turn front rollers as far up as possible. This will protect them during sliding or
moving.
• The cabinet should be well padded and handled with care. DO NOT DROP.
Automatic Ice Maker
Wire
Signal Arm
If your refrigerator has an automatic ice maker, it will provide a continuous supply of
ice for normal use. The automatic ice maker is an optional accessory which may be
installed in most models at any time. Call your local dealer for installation.
After the plumbing connections have been completed, the water supply valve must
be opened. Place the ice container under the ice maker, pushing it as far back as
possible. Lower the wire signal arm to its “down” or ON position. Because of new
plumbing connections, the first production of ice cubes may be discolored or have an
odd flavor. These should be discarded until the cubes made are free of discoloration
and taste.
To stop the ice maker, lift the wire signal arm until it clicks and locks in the “up” or
OFF position. The ice maker turns off automatically when the ice container is full. If your
model has an adjustable freezer shelf, place the shelf so the wire signal arm will hit the
ice when the ice container is full.
Remember, water quality
determines your ice quality. It is best to
connect the ice maker to water that is not
softened. Chemicals from a malfunctioning
softener can damage the ice maker. If ice
maker is connected to soft water, ensure
the softener is maintained and working
properly.