Frigidaire FKCH17F7HW, Техническое и сервисное руководство

Страница: 38 / 63

4-6
Component Teardown
Figure 5-10. Door Switch Removal
Figure 5-11. Glass Shelf Assembly Removal
Door Switch Removal
The door switch is mounted inside a hole in the
cabinet base along the lower right hand side.
(See Figure 5-10)
To remove the door switch:
1. Remove kickplate.
2. Reach into the access hole next to the door switch
and disconnect the electrical leads from the door
switch terminals.
3. Press in on the retaining latch on the switch body
and push switch through hole in cabinet base.
Interior Components
Glass Shelf Assembly Removal
The glass shelf assemblies have metal bars that slide
into holes in the cabinet interior liner walls. Rubber
bumpers are attached to the metal bars to prevent side
to side movement within the cabinet. (See Figure 5-11)
To remove the shelf assemblies:
1. Remove rubber bumpers from right side of shelf
assembly.
2. Remove shelf assembly by pushing to the right until
the metal bars are free from the left side liner wall.
Then tilt down or up until the shelf can be removed
from the right side liner wall.
Crisper Drawer Removal
The crisper drawers are removed by grabbing the
drawer by the handle and pulling the drawers out of
the unit. (See Figure 5-12)
To replace the crisper drawers, line up the plastic lip on
the outside edge of the crisper drawer with the slots
located under the crisper cover, then slide crisper
drawers back into unit.
Door Switch
Locating
Holes in
Liner Wall
Access Hole
Wire Terminals
Glass Shelf
Figure 5-12. Crisper Removal
Crisper Cover