WARM & SERVE DRAWER INSTALLATION INSTRUCTIONS
10
Warm & Serve Drawer Dimensions
Stand Alone Installation
Combination Warm & Serve Drawer/
30" (76 cm) Built-in Oven Installation
NOTE:
A 60" (152 cm) long cable is supplied with the
Warm & Serve Drawer.
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
GENERAL INFORMATION
The Warm & Serve Drawer can be used:
•
As a stand alone appliance
•
As a combination Warm & Serve Drawer with a 30" (76 cm) built-in oven mounted above
A. HEIGHT
B. WIDTH
C. DEPTH
9
7
/
8
" (25 cm)
30" (76,2 cm)
24
5
/
8
" (62,5 cm)
D. CUTOUT
E. CUTOUT
F. CUTOUT
HEIGHT
WIDTH
DEPTH
Min.
8
3
/
8
" (21,3 cm)
28
1
/
2
" (72,4 cm)
24" (61 cm)
Max. 8
5
/
8
" (21,9 cm)
28
3
/
4
" (73 cm)
D. CUTOUT
E. CUTOUT
F. CUTOUT
HEIGHT
WIDTH
DEPTH
Min. 38
1
/
2
" (97,8 cm) 28
1
/
2
" (72,4 cm)
24" (61 cm)
Max.
39" (99,1 cm)
28
3
/
4
" (73 cm)
IMPORTANT:
The Warm & Serve Drawer runs off a
single phase three-wire 120 volt, 60 hertz, AC only
electrical supply with ground.
A. HEIGHT
B. WIDTH
C. DEPTH
40" (101,5 cm)
30" (76,2 cm)
24
5
/
8
" (62,5 cm)
IMPORTANT:
The warmer drawer must be installed on a leveled surface from left to right, rear to front.
