2
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with Sealed Top Burners)
1 1/8"
(2.86 cm)
FRONT
OF
CABINET
F
Ref.
22 7/8"
(58.1 cm) min.
23 1/4" (59.05 cm) max.
(see Note 4)
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
*** IMPORTANT:
To avoid cooktop glass breakage for cutout width (E dimension) of
more than 30
1
/
16
" (76.4 cm), make sure the appliance is centered in the counter opening
while pushing into it. Raise leveling legs at maximum position, insert the appliance in
the counter and then level.
Make sure the unit is supported by the leveling legs
not by the cooktop glass itself.
IMPORTANT:
Cabinet and countertop
width should match the cutout width.
E
E
21¾”
(55.25 cm)
D
C
A
B
Door Open
(see note 5)
Side panel
A
. HEIGHT
B
.
WIDTH
C.
COOKTOP
WIDTH
D
.
DEPTH TO
FRONT OF RANGE
E
.
CUTOUT WIDTH ***
(Countertop and Cabinet)
F
.
CUTOUT
DEPTH
G
.
HEIGHT
OF COUNTERTOP
35 5/8" (90.5 cm) -
36 5/8" (93cm)
30" (76,2 cm)
31½" (80 cm)
28 5/16" (71,9 cm)
30±1/16"
(76,2±0,15 cm)
21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
36 5/8" (93 cm) Max.
35 5/8" (90.5 cm) Min.
3. 24" (61 cm) minimum clearance between
the cooktop and the bottom of the
cabinet when the bottom of wood or
metal cabinet is protected by not less
than ¼" (0.64 cm) flame retardant
millboard covered with not less than
No. 28 MSG sheet metal, 0.015"(0.4
mm) stainless steel, 0.024"(0.6 mm)
aluminum, or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8"(58.1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48.9 cm) clearance
for door depth when it is open.
