21
SETTING OVEN CONTROLS
SETTING CONTINUOUS BAKE OR 6 HOUR
ENERGY SAVING
The
TIMER
and
SELF CLEAN
pads control the Continuous
Bake or 6 Hour Energy Saving features. The oven control has
a factory preset built-in 6 Hour Energy Saving feature that
will shut off the oven if the oven control is left on for more
than 6 hours. The oven can be programmed to override this
feature for Continuous Baking.
To set the control for Continuous Bake or 6 Hour
Energy Saving features
1. Press and hold
TIMER
for 6 seconds.
After 6 seconds “
6Hr OFF
” or “
StAY On
” will appear
in the display and the control will beep once.
2. Press
SELF CLEAN
to switch between the 6 Hour Energy
Saving and continuous bake features.
Note: “
6Hr OFF
” in the display indicates the control is set for
the 6 Hour Energy Saving mode and
“StAY On”
indicates
the control is set for the Continuous Bake feature.
3. Press
START
to accept the change (display will return to
time of day) or press
CANCEL
to reject the change.
SETTING SILENT CONTROL OPERATION
The
DELAY START
and
SELF CLEAN
pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation
press and hold
DELAY START
. “
-- --
” will appear and
“
DELAY
” will fl ash in the display. After 6 seconds “
bEEP
On
” or “
bEEP OFF
” will appear in the display.
2. Press
SELF CLEAN
to switch between normal sound
operation and silent operation mode. The display will
show either “
bEEP On
” or “
bEEP OFF
”.
Note: If “
bEEP On
” appears, the control will operate with
normal sounds and beeps. If “
bEEP OFF
” appears, the
control is in the silent operation mode.
3. Press
START
to accept the change or press
CANCEL
to reject the change.
Note:
The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
SETTING TEMPERATURE DISPLAY —
FAHRENHEIT OR CELSIUS:
The BROIL and
SELF CLEAN
pads control the Fahrenheit
or Celsius temperature display modes. The oven control can
be programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display
in Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
BROIL and hold it for 6 seconds; “550°” will appear
and “BROIL”
will fl ash in the display and a beep will
sound. If “
FAhrnht
” appears, the display is set to show
temperatures in Fahrenheit. If “
CELSIUS
” appears, the
display is set to show temperatures in Celsius.
2. Press
SELF CLEAN
to switch between Fahrenheit or
Celsius display modes. The display will show either
“
FAhrnht
” or “
CELSIUS
”.
3. Press
START
to accept the change or press
CANCEL
to reject the change.