20
SETTING OVEN CONTROLS
MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE
MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME
PREHEAT
170°F/77°C
550°F/288°C
BAKE
170°F/77°C
550°F/288°C
BROIL
400°F/205°C
550°F/288°C
CONVECTION BAKE
170°F/77°C
550°F/288°C
CONVECTION ROAST
170°F/77°C
550°F/288°C
CONVECTION BROIL
400°F/205°C
550°F/288°C
PIZZA
170°F/77°C
550°F/288°C
CHICKEN NUGGETS
170°F/77°C
550°F/288°C
TIMER
12 Hr. Mode
0:01 Min.
11:59 Hr./Min.
24 Hr. Mode
0:01 Min.
11:59 Hr./Min.
CLOCK TIME
12 Hr. Mode
1:00 Hr./Min.
12:59 Hr./Min.
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
DELAY START
12 Hr. Mode
1:00 Hr./Min.
12:59 Hr./Min.
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
BAKE TIME
12 Hr. Mode
0:01 Min.
5:59 Hr./Min.
24 Hr. Mode
0:01 Min.
5:59 Hr./Min.
SELF CLEAN TIME
2 hours
4 hours
SETTING THE CLOCK
The
CLOCK
pad is used to set the clock. The clock may
be set for 12 or 24 hour time of day operation. The clock
has been preset at the factory for the 12 hour operation.
When the range is fi rst plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will fl ash.
To set the clock
(example below for 1:30)
1. Press
CLOCK
. “
CLO
” will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30. “
CLO
”
will stay in the display.
3. Press
START
. “
CLO
” will disappear and the clock will
start.
CHANGING BETWEEN 12 OR 24 HOUR TIME
OF DAY DISPLAY
1. Press and hold
CLOCK
for 6 seconds. “
CLO
” will appear
in the display.
2.
CONTINUE
holding the pad until “
12Hr dAY
” or “
24Hr
dAY
”
appears in the display and the control beeps
once.
3. Press
SELF CLEAN
to switch between the 12 and 24
hour time of day display. The display will show either
“
12Hr dAY
” or “
24Hr dAY
”.
4. Press
START
to accept the change or press
CANCEL
to
reject the change.
5. Reset the correct time as described in
To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.