background image

3

Record Your Model and Serial Numbers

Record in the space provided below the model and serial numbers. On all models, the serial
plate is located on the outside of the cabinet.

Model No. 

Serial No. 

Register Your Product

The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed
and returned to the Frigidaire Company.

2

Warranty

3

Product Registration

3

Normal Sounds

4

Important Safety Instructions

4

Energy Saving Ideas

5-11

Using Air Conditioner

6-11

Air Conditioner Features

11

Care and Cleaning

12

Avoid Service Checklist

Vibration

Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.

High Pitched Chatter

Today’s high efficiency compressors
may have a high pitched chatter
during the cooling cycle.

Sound of Rushing Air

At the front of the unit, you may
hear the sound of rushing air
being moved by the fan.

Gurgle/Hiss

 “Gurgling or hissing” noise may be heard
due to refrigerant passing through
evaporator during normal operation.

Pinging or Swishing

Droplets of water hitting
condenser during normal
operation may cause “pinging
or swishing” sounds.

Product Registration

Contents

Normal Sounds

NOTE:

 This Owner ’s Guide provides

specific operating instructions for your
model. Use the room air conditioner only
as instructed in this Owner’s Guide. These
instructions are not meant to cover every
possible condition and situation that may
occur. Common sense and caution must be
practiced when installing, operating, and
maintaining any appliance.

SZ000302(En)-YaoKong(1018)

10/25/2004, 2:33 PM

3

Содержание 220201d011













Отзывы: