Friedrich VERT-I-PAK R410A, Руководство по обслуживанию и запасным частям

Страница: 4 / 61

Do not spray or pour water on the return air grille, discharge air grille, evaporator coil, control panel,
•
and sleeve on the room side of the air conditioning unit while cleaning.
Electrical component malfunction caused by water could result in electric shock or other electrically
•
unsafe conditions when the power is restored and the unit is turned on, even after the exterior is dry.
Never operate the A/C unit with wet hands.
•
Use air conditioner on a single dedicated circuit within the specifi ed amperage rating.
•
Use on a properly grounded electrical circuit only.
•
Do not use extension cords with the unit.
•
Follow all safety precautions and use proper and adequate protective safety aids such as: gloves,
•
goggles, clothing, adequately insulated tools, and testing equipment etc.
Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.
•
REFRIGERATION SYSTEM HAZARDS:
Use approved standard refrigerant recovering procedures and equipment to relieve pressure before
•
opening system for repair.
Do not allow liquid refrigerant to contact skin. Direct contact with liquid refrigerant can result in minor
•
to moderate injury.
Be extremely careful when using an oxy-acetylene torch. Direct contact with the torch’s fl ame or hot
•
surfaces can cause serious burns.
Make sure to protect personal and surrounding property with fi re proof materials.
•
Have a fi re extinguisher at hand while using a torch.
•
Provide adequate ventilation to vent off toxic fumes, and work with a qualifi ed assistant whenever
•
possible.
Always use a pressure regulator when using dry nitrogen to test the sealed refrigeration system for
•
leaks, fl ushing etc.
Make sure to follow all safety precautions and to use proper protective safety aids such as: gloves,
•
safety glasses, clothing etc.
Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.
•
MECHANICAL HAZARDS:
Extreme care, proper judgment and all safety procedures must be followed when testing,
•
troubleshooting, handling, or working around unit with moving and/or rotating parts.
Be careful when, handling and working around exposed edges and corners of sleeve, chassis, and
•
other unit components especially the sharp fi ns of the indoor and outdoor coils.
Use proper and adequate protective aids such as: gloves, clothing, safety glasses etc.
•
Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.
•
3