Friedrich MRM36Y3J, Инструкция по установке и эксплуатации

Страница: 22 / 36

Step two: install
ZDOOEUDFNHW
Installation of indoor unit
Step one: choosing installation location
+DQJZDOOEUDFNHWLQVWDOOFHQWHUVFUHZDQGDSSO\OHYHO
,IUHTXLUHGSUHGULOOLQWKHORFDWLRQV\RXYHFKRVHQIRUPRXQWLQJLQVWDOOUHTXLUHG
PRXQWLQJKDUGZDUHDQGVHFXUHWRZDOO
1. Choose the position of piping hole according to the direction of outlet pipe. The
position of piping hole should be a little lower than the wall-mounted frame,
shown as below.
Step three: open piping hole
'ULOOKROHWKURXJKZDOOZLWKDGLDPHWHURIRQWKHVHOHFWHGORFDWLRQ
. In
order to drain smoothly, slant the hole on the wall slightly downward to the
outdoor side with the gradient of 5-10°.
Left
Wall
ĭ
Right
Rear piping hole
Wall
ĭ
Rear piping hole
Space
to the
wall
above
LQ
Space
to the
wall
above
LQ
Mark FHQWHUORFDWLRQ Level