Friedrich MRM36Y3J, Инструкция по установке и эксплуатации

Страница: 25 / 36

2
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
Installation of indoor unit
Note:
Ɣ $OOHOHFWULFDOFRQQHFWLRQVPXVWEHFRPSOHWHGE\DTXDOLILHGSURIHVVLRQDO
Ɣ ,IUHTXLUHGE\ORFDOFRGHLQVWDOOFLUFXLWEUHDNHULQOLQH0XVWEH3ROH
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
Notice before installation
1. How to install the over line pipe(According to the direction as show.)
)LQLVK$FFRUGLQJWRWKHGLUHFWLRQDVVKRZLQULJKW¿JXUH
wire pipe
Fixed nut
Screw
2 N(1)
Outdoor unit connection
green
green)
red black
(yellow- (brown)
white
(blue)