Friedrich EMWRT2, Инструкция по эксплуатации

Страница: 11 / 52

CONFIGURATION
BUTTON
11
Thermostat Configuration
Once the thermostat is powered, thermostat configuration settings will appear on
the thermostat screen.
In order to properly operate the PTAC/Vert-I-Pak unit:
➤ Set the thermostat clock;
➤ Enter the room number;
➤ Configure the equipment settings;
➤ Select Energy Savings Preset;
The thermostat configuration screens have a 3-minute time-out. If no action is
taken within three (3) minutes, the thermostat will exit configuration settings.
NOTE: If the thermostat is connected to a network, the equipment settings
configured on the thermostat will be ignored and the thermostat settings
configured through the network will be applied.