D
C
B
A
SWX C/D
15
GB
Fitting the wall bracket
1. Remove the eight screws indicated by the
arrows in picture A.
2. Install the brackets with the holes toward
the fan motor, as shown in picture B.
3. The fan heater may be mounted with the
connection pipes facing left or right, as seen
from the front. In rooms with high ceilings,
the fan heater should be installed in a low
position, but not so low that it intrudes on the
working space. Make sure that the wall is able
to support the weight of the fan heater.
4. The fan heaters are delivered with the air
deflector installed for water connection on the
left hand side. If the fan heater is mounted
with the pipes facing right, the air deflector
must be turned for the air to be deflected
downward. Remove the six screws (1/4” hex
head) attaching the air deflector as shown in
picture C, lift out the air deflector and turn it
180°. Then reattach it.
5. Mount the fan heater as shown in photo D
when mounting it on the ceiling for a vertical
air stream. The minimum distance to the
wall should be 700 mm. If the fan heater
is mounted on a ceiling, near a corner, the
minimum distance to one of the walls should
be 700 mm and to the other 2000 mm. Make
sure that the ceiling is able to support the
weight of the fan heater.
