SUN30
6
EN
Drainage
When the water tank is full, the dehumidifier
will stop for self-protection and the "WATER
FULL" indicator will show a red light and the
buzzer will sound. To remove the water tank,
pull it straight out from the unit.
After empting the water tank, put it back into
position. Make sure it is properly positioned,
in order for the "WATER FULL" indicator to go
out and the dehumidifier is operating. Please
note that the "WATER FULL" indicator will not
go out until the water tank has been positioned
correctly.
Continuous drainage
When the dehumidifier is operated at high
temperatures and high humidity levels, the
water tank will require more frequent drainage.
In this situation, it may be more convenient to
set the unit up for continuous drainage with the
following procedure:
1. Pull out the water tank.
2. Connect the drain hole inside the unit with
the supplied "adapter for continuous drain".
3. Connect the adapter to a water hose with
an inner diameter of 12 mm (this hose is not
supplied with the unit).
4. Ensure the water will always drain away freely
and the hose remains in place.
NOTE! In cold weather conditions, precautions
should be taken to prevent the water in the
hose from freezing.
