SUN30
5
EN
Art.no Type
Power*
1
[W]
Airflow
[m³/h]
Sound
level*
2
[dB(A)]
Humidity
range
[% RH]
Temp.
range
[°C]
Voltage
[V]
Amperage
[A]
Weight
[kg]
247275
SUN30
660
200/280
47/51
30-100
8-32
230V~
2,9
18,5
1. Timer (button, 1-24 hours)
2. Timer indicator (LED)
3.
Humidity selection button
4.
Humidity indicator (LED)
5. Full tank indicator (LED)
6. Low speed indicator (LED)
7. Fan speed
8.
High speed indicator (LED)
9. ON/OFF (power) indicator (LED)
10. ON/OFF button
11. Display (shows current humidity)
1
2
3
4
5
6
7
8
9
10
11
Operating hour meter
• The operating hour meter counts the
compressor operating time.
•
The 5 first digits shows the operating time in
hours.
• The operating hour meter will count-on
continuously and never reset back to "zero".
Operation - settings
Start up
Plug the unit into a 230V earthed socket.
Press the ON/OFF button to turn on the unit.
The dehumidifier will start to work in CONT
mode (continuous dehumidification). If the
dehumidifier is not turned off by the ON/OFF
button or has been turned off for at least 3
minutes, the start of the compressor will be
delayed for 3 minutes.
To turn off the unit, press the ON/OFF button
again.
Setting of fan speed (low/high).
Press the SPEED button to select the fan
speed, high or low. High speed increases
dehumidification.
Setting desired humidity
Press button HUM to set the humidity:
continuous dehumidification, 40%, 50%, 60% or
70%. When the current humidity is below 35%,
the display will show ‘LO’ and if the current
humidity is over 95%, it will show ‘HI’. If the fan
speed HI is selected, it will change to LO when
the compressor stops and change to HI again
when the compressor starts.
Timer function
When the Timer button is pressed, its LED (2)
lights up. Press the Timer button to set the time
of operation, between 0 and 24 hours. The time
increases by one hour with each press of the
button. The set time will flash before the display
returns to show humidity. To see the remaining
time, press the Timer button again. The timer is
activated as long as its LED (2) is lit. The unit will
be on continuous dehumidification if no time is
set.
