Frico Soloclim vertical SCV21DCI, Руководство по установке, Страница: 8 / 13

Soloclim Vertical - Utilisation
8
EN
The key lock is activated by keeping the Timer symbol on
the touch-screen display pressed for three seconds.
The user cannot perform any actions.
The stand-by symbol flashes every second.
To deactivate the lock, keep the Timer symbol on the touch
screen pressed for three seconds once again.
The lock remains active also for the next operations
performed via remote control and in the event of a power
failure.
Press and hold the air exchange key ( ) for 10
seconds to enable the function ("En" displayed); the
dehumidification and Auto functions are disabled (leaving
active only ventilation, heating and cooling) and the
settable set range is reduced from 22 to 28 in cooling mode
and from 16 to 24 in heating mode).
The display brightness sensor can be disabled (leaving the
maximum brightness at all times) by pressing and holding
the night button ( ) for 10 seconds. "ds" (disabled) or
"En" (enabled) will appear on the display.
Touch-screen display key lock
Hotel function
It is possible to deactivate the heating or the cooling modes
following a simple procedure.
Keep the A key on the touch-screen display pressed for
5 seconds until HC (heating and cooling) appears on the
display.
Press the A key for 1 second to switch to the CO (cooling
only) mode. Press the A key again to switch back to HO (heating only)
mode.
Wait for 3 seconds without touching anything to memorise
the setting and return to normal operations.
Setting cool only or heat only modes
Brightness regulation