SIRe Competent Air Curtains Water
29
GB
Summer / winter
System on/off
Installer menu
Main menu
Enter password
0
0 0 0
(See manual)
Main menu > Installer menu
>> Installer status screen
External on/off
OFF
0-10V fan control
OFF
0-10V heat control
OFF
>> Installer status screen
Internal unit temperature
22°C
Units
4
Serial no.
0949000002
Installer status screen
Week program
Fan settings
> Installer menu
>> Installer status screen
Functionality mode
Comp.
Door mode Flexibel
Current stage ---
Over run mode Auto
Program
AC11
Installer status screen
Week program
Fan settings
> Installer menu
New program step
Check program
Change program
> Installer menu > Week
program
Kontrollera program
Mån
Tis Ons Tor Fre Lör Sön
08:00 Dag (1)
18:00 Natt (2)
Week program on/off
New program step
Check program
> Installer menu > Week
program
Check program
Change program
Remove program
> Installer menu > Week
program
Check program
Change program
Remove program
> Installer menu > Week
program
Weekday
New program step 7/16
Mon
Tue
Wed
Thu Fri Sat Sun
Tue 10:45
End
Weekday
New program step 7/16
Mon
Tue Wed Thu Fri Sat Sun
Tue 10:45
Time
00
:00
►
New program step 7/16
Tue 10:45
Mode
Day ►
New program step 7/16
Tue 10:45
Week day
Change program 1/16
Mon Tue
Wed
Thu Fri Sat Sun
Tue 10:45
End
Weekday
Change program 1/16
Mon
Tue Wed Thu Fri Sat Sun
Tue 10:45
Time
00
:00
Tue 10:45
Change program 1/16
Change program
Mon Tue Wed Thu Fri Sat Sun
1. 08:00 Day
2. 18:00 Night
3. 10:00 Day
4. 16:00 Night
Remove single
Remove all
Reset all
Remove program
Change program
Mon Tue Wed Thu Fri Sat Sun
1. 08:00 Day
2. 18:00 Night
3. 10:00 Day
4. 16:00 Night
Installer menu
To enter the Installer menu, code 1932 is
entered. Select the digits using the rotary dial
and confirm using the forward arrow.
Installer status screen
Check the settings. The installer status screen
consists of three pages with settings, scroll
using the rotary dial.
Week program
Make settings for week program.
A basic program is pre-entered in SIRe.
Mon-Fri Day from 08:00, Night from 18:00
Sat
Day from 10:00, Night from 16:00
Sun Day from 11:00:00, Night from
14:00:00
To check which program is set for a particular
day, select Check program and then switch
between the days using the rotary dial.
To check which days a certain program is
active, select a week day by pressing the
forward arrow, the program is marked and
those days that the program is used will be
underlined, switch between the programs for
a particular day using the rotary wheel.
To add program step, select New program
step. Confirm your selection with the forward
arrow.
Select Day, Night or Off (if the unit should not
be in operation), set the time for switch on
and then for which days the program applies,
then go to End to finish.
A new program step does not replace a set
time for Day for example, but you can instead
select to change a program step.
To change a program step, select Change
program.
The program steps that should not apply
are removed in Remove program. One or all
program steps can be removed in the menu.
To return to the factory set basic program,
select Reset all.
