background image

RAR3500

16

GB

Residual current circuit breaker

(applies to units with electric heater)

When the installation is protected by means 
of a residual current circuit breaker, which 
trips when the appliance is connected, 
this may be due to moisture in the heating 
element. When an appliance containing a 
heater element has not been used for a long 
period or stored in a damp environment, 
moisture can enter the element. 

This should not be seen as a fault, but is 

simply rectified by connecting the appliance 
to the mains supply via a socket without a 
safety cut-out, so that the moisture can be 
eliminated from the element. The drying 
time can vary from a few hours to a few days. 
As a preventive measure, the unit should 
occasionally be run for a short time when it is 
not being used for extended periods of time.

Safety

•  For all installations of electrically heated 

products should a residual current circuit 
breaker 300 mA for fire protection be used.

•  Keep the areas around the air intake 

and exhaust grilles free from possible 
obstructions!

•  During operation the surfaces of the unit 

can be hot!

•  The unit must not be fully or partially 

covered with clothing, or similar 
materials, as overheating can result in a 
fire risk! (RAR3500E)

•  This appliance can be used by children 

aged from 8 years and above and 
persons with reduced physical, sensory 
or mental capabilities or lack of 
experience and knowledge if they have 
been given supervision or instruction 
concerning use of the appliance in a 
safe way and understand the hazards 
involved. Children shall not play with 
the appliance. Cleaning and user 
maintenance shall not be made by 
children without supervision. 

Содержание RAR3500 Series


















Отзывы: