PCW
79
GB
PCAS
When controlling more than one fan
convector PCW, the PCAS slave unit must be
used together with PCER1 or PCER2.
Each fan unit is supplied with its own PCAS
and then controlled by a PCER1 or PCER2.
A maximum of 8 fan convectors can be
controlled across a control unit.
Installation instructions
Mounting of PCAS must be made on the
opposite side of the fan convector's water
connections.
• Secure the control unit's support bracket
on the edge of the inner side panel.
• Ensure that the side panel where PCAS is
to be attached is clean.
• Insert the terminal board of the control
unit (MC) into the fan convector's
terminal board of the fan coil (MFC).
Remember to tighten the screws of the
terminal board.
See the wiring diagram.