FRIATEC FRIAMAT, Руководство по эксплуатации

Страница: 22 / 36

22
5.3.4 Altering currently set (activated) commission numbers
As described in Section 5.3.1, go into the “Change/Specify commission
nos.” setting menu.
After you press the START button the currently set commission no. will
appear. The first character will flash. This can be increased by pressing the
INFO button or decreased by pressing the MENU button. With the START /
STOP button you can move left or right within the commission no. With the
SET button the commission no. set will be saved, and with the RES button
you can break off the process without saving. By pressing the STOP button
again you can go back to the basic setting.
IMPORTANT ! The altered commission no. will not be available in the
commission no specification menu.
5.3.5 Deactivating Commission Nos.
The “Commission No” option will be deactivated by reading in the
COMMISSION OFF CODE (see plastic card in the accessories pouch).
5.4 Info-text
With the documentation switched on there is a facility to assign an individual
additional text (2x16 characters) to each individual fusion process in the
report. After reading in the fitting bar code press the INFO / MENU button.
The last text entered will appear. The first character will flash. This can be
increased by pressing the INFO button or decreased by pressing the MENU
button. With the START / STOP button you can move left or right within the
Info text. With the SET button the Info-text set will be saved and with the RES
button you can break off the entry process.
Commission No.
12 Dossenheimer Way
FRIAMAT
2
➔
Code 498