FRIATEC FRIAMAT, Руководство по эксплуатации

Страница: 12 / 36

12
3.2 Date and time
There are two ways of setting date and time.
1. Through the main menu:
Go into the main menu by pressing the MENU button. Now press the
MENU button as many times as it takes for the “Set Date / Time” setting
menu to appear in the display. To set the date / time press the START
button. “FRIAMAT” and the designation of your model will appear in the
top line of the display, whilst the date and time will appear in the bottom
line. The first character will flash. With the INFO / MENU button you can
move one day forward / back. With the START / STOP button you can
move left or right. With the SET button you can confirm and save the new
Date / Time, and with the RES button you can break off without saving.
After pressing the SET or RES button, press the STOP button at the end to
cancel the menu selection.
2. Reading in the TIMER bar code
“FRIAMAT” and the designation of your model will appear in the top line of
the display, whilst the date and time will appear in the bottom line. The first
character (Day) will flash. With the INFO / MENU button you can move one
day forward / back. With the START / STOP button you can move left or
right. With the SET button you can confirm and save the new Date / Time,
and with the RES button you can break off without saving.
FRIAMAT
01.Jul 1999 14:34
3.3 Setting the signal volume
Go into the main menu by pressing the MENU button. Now press the MENU
button as many times as it takes for the “Signal Volume” setting menu to
appear in the display. To set the signal volume press the START button.
“Signal Volume” will appear in the top line of the display, whilst “loud” will
appear on the left in the bottom line and “quiet” on the right. By pressing the
START / STOP button you can adjust the signal volume to loud / quiet. Press
the STOP button at the end to cancel the menu selection.