FRIATEC FRIAMAT GEO PRINT, Руководство по эксплуатации

Страница: 6 / 24

6
1.4 Sources of danger
- Replace damaged mains lead and extension
cables immediately.
- Do not remove or disable safety devices.
- Rectify known faults immediately.
- Do not leave your FRIAMAT
® fusion unit un at tend -
ed.
- Keep away from flammable liquids/gases.
- Do not operate in EX environment.
1.5 Authorised users
Only trained personnel may work using your
FRIAMAT
® fusion unit. The user is responsible for
third parties in the work area. The user must:
- make accessible the operating instructions to the
operator and
- ensure that he or she has read and understood
them.
1.6 Dangers from electric power
- Do not use any damaged connecting cables.
- Check connection cable for any damage.
- Pull out the plug prior to any maintenance or
service tasks!
- Allow any service and repairs to be carried out
only at authorised service stations!
- Connect fusion units of the FRIAMAT ® range only
to supply voltage as given on type plate.
DANGER!
Distribution points on the construction site:
observe regulation on circuit breakers!
Outdoors (on construction sites) receptacles must
be fitted with fault-current circuit breakers. When
using generators, the DVGW worksheet GW308 and
the VDE 0100 Part 728 need to be observed. The
required generator nominal output depends on the
output required by the largest fitting to be used, on
connection conditions, ambient conditions and the
actual generator type (its control characteristics). As
the generators from different model ranges often
display very different control characteristics, the
suitability of a generator cannot be guaranteed by
the specified rated output alone.
FM_2427_2_GB_03_12.qxp:- 28.03.2012 9:28 Uhr Seite 6