5
Step 9 & 10:
Ensure the leg assembly is still
centered, both side-to-side and front-to-back.
Secure the leg assembly to the worksurface
with
N
(12) truss head screws M5*20mm.
Secure the side bracket to the worksurface
with
N
12 truss head screws M5*20mm.
Step 9a:
With option of post foot, as
shown below:
Step 8:
Secure
E
center rails to
D
crossbeams with
L
(8) socket button head
bolt M6*12mm.
Step 8a:
With option of post foot, as
shown below:
Step 11:
Secure the
F
control panel in the
desired location with
N
(2) truss head screws
M5*20mm. Insert the
G
control box in-
between crossbeams.
Step 11a:
With post foot option as shown
below:
N
TRUSS HEAD
SCREWS
M5*20mm
F
CONTROL
PANEL
G
CONTROL BOX
L
SOCKET BUTTON
HEAD BOLT
M6*12MM
E
CENTER
RAILS
N
TRUSS HEAD
SCREWS
M5*20MM
D
CROSS
BEAMS
G
CONTROL
BOX
M
WIRE
MANAGER
I
CONNECTOR
WIRES
Step 12:
Connect
F
control panel to
G
control
box with
I
connector wires as shown. Use
M
wire manager to secure
I
connector wires to
underside of worksurface.
Step 12a:
With option of post foot, as
shown below:
F
CONTROL
PANEL