Fri-Jado LDR 8s AC Gas, Руководство по обслуживанию

Страница: 37 / 86

SOFTWARE
Page 37
Service Manual LDR 8s AC
II
form 9120934 rev. 02/2022
Level 1 Level 2 Level 3
Change Pin code Option to change the manager pin code
Toggle Light Option to switch on or off the interior light.
Temperature unit Change the temperature units from Fahrenheit to Celcius or from Clecius to Fahrenheit.
Volume unit filter Change the volulme units from Liters to Gallon or from Gallon to Liters.
UTC time Set to local time
UTC date Set to local date
Time zone offset Option to set a offset to the timezone (12 to +12 hours)
Time format Option to select the desired time format
Date format Option to select the desired date format
Alarm Switch alarms on or off
End-user recipe
editing
Enables the end user to change and save recipes
Ask weight
Option to activate or deactivate the question at the start of a recipe
for a low/middel of full load.
Preheat mode
Option to deactivate or activate preheat. !x means once at the begin-
ning of the day, continue means at each recipe start.
Preheat temp
default
Option to set the desired default preheat temperature
Eco function
Option to enable or deactivate the Eco function. The eco mode
saves enery to use latent heat at the end of the recipe. (this will in-
crease the total recipe time)
Audio Audio setting
Option to set the desired audio sound (tone)
Audio factor
Option to adjust the audio volume
Test audio
Function to test the set audio options
Sound set
Option to set the desired sound/melodie
key board beep
Option to activate or deactivate the beep at the touch of the key
board.
Filter capacity
Option to set the actual filter capacity of the used water filter system
in relation to the water quality on site. Set "-" if no filter is installed.
Lime filter
Shows the remaining filter capacity of the lime filter.
Lime filter re -
placed
When the lime filter is replaced set to yes so the counter will be reset
to the start filter capacity.
Clean screen time
Option to set the time for cleaning the screen without a response of
the controller.
Store number
Here you can enter the store number or other store references
Reference cook
Recipes -> USB
Copy all recipes from the rotisserie to the USB key.
Recipes <- USB Copy all recipes from a USB key to the rotisserie.
Add recipes <-
USB
Copy selected recipes from a USB key to the rotisserie.
device type Option te set the correct device type so the oven configuration will be active.
Smart temperature Do not change
auto-correct Option to activate or deactivate the auto correct function which adds time if neccasarry (Due
to high product load or temperature loss) to the remaining time.
Correction factor With this setting you can change the effect of the auto-correct.
EXPLANATION OF PARAMETERS