Fri-Jado HOT DELI 3, Руководство по обслуживанию

Страница: 39 / 124

ELECTRICAL TESTS AND SERVICE PROCEDURES
Service Manual Hot Deli HD3/4/5/7 form 9123549 rev.03/2017 Page 39
PRODUCT TEMPERATURE PROBE SETTINGS DANFOSS EKC 102A
TILL SERIAL NUMBER 100080408
DANFOSS EKC 102A
Temperature probe
HD 3-4-5-7
Setpoint °C 2
r01 Differential °C 2
r02 Higher setpoint limit °C 99
r03 Lower setpoint limit °C 0
r04 Off-set temperature indication °C 0
r05 Temperature unit (°C / °F) °C °C
r09 Correction of signal from air output °C 0
r12 Start / stop of temperature control 1
c01 Minimum “ON” time compressor min 0
c02 Minimum “OFF” time compressor min 0
c30 Reversed function of relay contact OFF
d01 Defrost method (0=none) 0
d02 Defrost end temperature °C 6
d03 Defrost interval hour 8
d04 Maximum defrost time min 45
d05 “ON” delay after defrost min 0
d10 Defrost sensor (0=time, 1=air) 0
d13 Defrost at start up no
o01 Output delay after start up sec 5
o05 Access code all settings 0
o06 Sensor type Pt
o07 Warm (HE) / cold (rE) RE
o15 Step value display (yes = 0.5°C / no = 1°C) no
o65 Store parameters under number 0
o66 Restore parameters as stored 0
o67 Store current parameter as factory
default OFF
u58 Status relay 1 -
A6 Heating switch
A7 Lighting switch
A8 IR emitter switch
If the elements are switched on, the indicator
lamp A1 will go on.