Fri-Jado HOT DELI 3, Руководство по обслуживанию

Страница: 16 / 124

REMOVAL AND REPLACEMENT OF PARTS
Service Manual Hot Deli HD3/4/5/7 form 9123549 rev.03/2017 Page 16
1. Remove the left side panel and the cover
plate according prior procedure.
2. Remove the water tray door and the
water tray.
3. Disconnect the wiring of the sensor on
the electronic water level control
(2 middle pins).
4. Remove the 2 nuts and screws that secure
the sensor bracket and remove the sensor.
5. Reverse the procedure to install.
1. Remove the water tray door, the water
tray and the pans and frame inside the
cabinet.
2. Remove the left and right hand panel on
the backside according prior procedures.
3. Disconnect the wiring from the elements.
4. Cut the sealant between cover housing
and the inside back plate in the cabinet
see arrow).
5. Remove the 2 bolts that secure the cover
housing of the elements.
6. Slide the cover housing towards customer
side and lift it out.
7. Remove the nuts and rings that secure the
heating elements and remove the
element(s).
8. Reverse the procedure to install.
Note: Apply sealant between cover housing
and the inside back plate in the cabinet.
WATER LEVEL SENSOR
HEATING ELEMENT WATER TRAY