Fri-Jado HOT DELI 3, Руководство по обслуживанию

Страница: 18 / 124

REMOVAL AND REPLACEMENT OF PARTS
Service Manual Hot Deli HD3/4/5/7 form 9123549 rev.03/2017 Page 18
1. Remove the right side panel according
prior procedure.
2. Remove the nuts that secure the cover
plate and remove this plate.
3. Remove the nuts that secure the
mounting plate and remove this plate.
4. Remove the grey flat cable and the flat
cable from the keypad.
5. Remove the nuts that secure the display
board and remove the board.
6. Remove the nut that secures the earth
cable on the panel and remove the cable.
7. Remove the back panel by lifting it out of
the hinges.
8. Remove the nut that secures the back
plate of the keypad and remove this
plate.
9. Remove the keypad and clean the surface
with a degreaser.
10. Fasten the back plate back on the panel
and apply the keypad.
11. Apply acid free sealant around the green
flat cable.
12. Reverse the procedure to install.
Note: It is also possible to order a complete
back plate with keypad.
KEYPAD