Fri-Jado CLASSIC DECK HOT MERCHANDISER, Руководство по обслуживанию

Страница: 15 / 44

Putting the new glass in place

Attach all nuts B by hand.

Hold nut B in position using a spanner.

Tighten nut A firmly using a spanner.

Put the insulation plates in the top !

Apply the top plate.

Thoroughly clean the side and remove any
traces of fat.


Glue a piece of foam of 1/8". (X) on the top
side.

Apply silicone paste following the pattern as
shown in above picture.

Position the notches which are glued to the
glass in the holes.

Put the brackets on the threaded studs.

Put the screws in the top plate

Put the bottom plate in the unit.

Position the honey comb profile with the
retainer in the opening.

Place the product stopper in the channel in
the bottom plate.
X
SERVICE MANUAL MULTI DECK 60/100/120 / CLASSIC DECK FORM 9123661 REV. 10/2015
Page 15
REMOVAL AND REPLACEMENT OF PARTS