23
Liberty Cycler Options
What are my optional hardware settings on the Liberty?
All of the following settings under the “Hardware” tab of the “My Settings” page should be entered
before you start your first treatment.
•
Alarm loudness
– Can be set between 1 (soft) and 20 (loud)
•
Key loudness
– Can be set between 0 (off) and 20 (loud)
•
Date format
– Can be set as either MM/DD/YYYY or DD/MM/YYYY
•
Date
– Your cycler arrives with the date already set
•
Time format
– Can be set as either 12-hour (AM/PM) or 24-hr time
•
Time
– Your cycler arrives with the date set for the Pacific Standard time zone. Reset the time
to your specific time zone by following the directions in your Liberty Cycler User’s Guide.
•
Screen blanking
– The purpose of the screen blanking functionality is to darken the touch screen
so that there is no added light in the room. If this option is set to “on” your touch screen to will go
dark after 10 minutes of inactivity. If you select “off”, it will always stay on. When your screen goes
into screen blanking mode, it will darken the screen and stay that way until you touch the screen
to bring the picture back up. Therefore, if there is an alarm, simply touch the screen and the
picture will reappear.
•
Screen brightness
– Can be set between 1 (very dim) and 10 (brightest)
