Push the 8 LEDs through their holes, remembering that the long legs go through the holes
marked ‘+’.
Don’t solder them in place yet!
Mount the panel PCB onto the panel, tighten up
all the nuts – it’s worth checking that the LEDs will fit smoothly through the holes before
doing this, as some can be a little tight – if needed a scalpel can be used to shave the holes
slightly wider. Place the assembly face down, push the LEDs into position and solder in
place.
Plug the Main PCB into the Panel PCB…you’re done!
http://www.frequencycentral.co.uk/
