Fremco MicroFlow LOG, Руководство по эксплуатации

Страница: 24 / 40

P a g e | 24 of 40
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TEL45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
11.3.
USE OF “LOG” CONTROL UNIT
The control unit is used for operating the fiber blowing machine as well as adjusting the different parameters, for
instance speed and torque level.
The control unit is an embedded controller build into the casing. A Samsung tablet is included in the purchase
and used for report input, as well as a display for jobs and reports.
Please note : That the control unit is required for controlling the Microflow and needed for pre-set of job
parameters, report parameters, feedback from the machine, and for report jobs.
Please note : If the operator want to use the tablet for sending the reports via email or put them to a shared
folder like dropbox or google drive. The tablet must be setup with the appropriate accounts.
All job controls are
handled on the chassis
controls
The tablet is used for pre-
set, shows job
information, and is used
for sending reports