Fremco MicroFlow LOG, Руководство по эксплуатации

Страница: 13 / 40

P a g e | 13 of 40
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TEL45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
10.1. DISPLAY SYMBOLS
Start Indicates machine is running Book-service Info: it is time to book an
authorized service check
Forward Motor direction, press to
toggle between forward and
reverse
Set Press to go to setup page
Reverse Motor direction, press to
toggle between forward and
reverse
Setup Press to set stop length.
Not active if value is “0”
Speedometer Motor speed Confirm Press to confirm info and
return to main page
Torque Motor torque Torque
overload Info when machine is
stopped by the torque
overload system
Meters Actual values for length,
speed and torque
Fiber protection Info when machine is
stopped by the fiber
protection system
Pre-set Pre-set values for length,
speed and torque
Stop Info when machine is
stopped, e.g. fiber or torque
stop
Ramps Motor acceleration/
deceleration ramp functions Reset Resets meter counter
Home Press to return to main
window Login Log in to a service info page
(login is required, and only
for service personnel)
Maintenance Info: it is time for
maintenance Close page Press close service info and
return to main window