freightliner 108SD, Руководство пользователя

Страница: 56 / 192

Lumbar Support, National 2000
Series Seat
To adjust the lumbar support, use the lumbar support
switch on the side of the seat to give more or less
support to your lower back.
Height Adjustment, National 2000
Series Seat
To raise or lower the height of the seat, use the
height adjustment switch on the side of the seat.
Fore-and-Aft Seat Adjustment,
National 2000 Series Seat
To adjust the fore-and-aft position of the entire seat,
move the fore-and-aft seat adjustment lever to the
left and slide the seat forward or backward to the
desired position. Move the lever back to its original
position to lock the seat in place.
Bottom Cushion Fore-and-Aft
Adjustment, National 2000 Series
Seat
To adjust just bottom cushion, lift the bottom cushion
adjustment handle and pull forward or push back to
the desired setting.
Isolator, National 2000 Series Seat
To engage the isolator, turn the isolator handle to the
horizontal position. Lock out the isolator by turning
the isolator handle down.
Rear Cushion Adjustment, National
2000 Series Seat
To adjust the height of the rear of the seat cushion,
remove your weight from the seat and turn the rear
cushion adjustment knob to one of three positions.
Seat Belts and Tether Belts
General Information, Seat Belts and
Tether Belts
Seat belt assemblies are designed to secure persons
in the vehicle to help reduce the chance of injury, or
the amount of injury, resulting from accidents or sud-
den stops. For this reason, Daimler Trucks North
America LLC urges that the driver and
all passen-
gers, regardless of age or physical condition, use
seat belts when riding in the vehicle.
WARNING
Always use the vehicle’s seat belt system when
operating the vehicle. Failure to do so can result
in severe personal injury or death.
Seat belt assemblies in Daimler Trucks North
America (DTNA) vehicles meet Federal Motor Ve-
hicle Safety Standard 209, "Type 1" and "Type 2" re-
quirements.
When transporting a child, always use a child re-
straint system or the vehicle seat belts as appropri-
ate. To determine whether a child restraint system is
required, review and comply with applicable state
and local laws. Any child restraint used must comply
with Federal Motor Vehicle Safety Standard 213,
"Child Restraint Systems." When providing a child
restraint system, always carefully read and follow all
instructions pertaining to installation and usage for
the child. Make certain the child remains in the re-
straint system at all times when the vehicle is in mo-
tion.
In addition to seat belt assemblies, tether belts are
installed on suspension-type seats. Tether belts pro-
vide a flexible extension of the cab structure. They
help secure the seat to the floor, and are intended to
restrain the seat and seat belt in case of an accident
or sudden stop.
IMPORTANT: Seat belts and tethers have a fi-
nite life which may be much shorter than the life
of the vehicle. Regular inspections and replace-
ment as needed are the only assurance of ad-
equate seat belt security over the life of the
vehicle.
Inspection, Seat Belts and Tether
Belts
WARNING
Inspect and maintain seat belts. When any part of
a seat belt system needs replacement, the entire
seat belt must be replaced, both retractor and
buckle side. Any time a vehicle is involved in an
accident, and the seat belt system was in use,
Seats and Restraints
6.6