freightliner 108SD, Руководство пользователя

Страница: 154 / 192

Periodic Inspections and
Maintenance
Regulations in Canada and the U.S. clearly indicate
that it is the driver’s responsibility to perform an in-
spection, and ensure the complete road-worthiness
of a vehicle, before placing it into service. Commer-
cial vehicles may be subject to inspection by autho-
rized inspectors, and an unsafe vehicle can be taken
"out of service" until the driver or owner repairs it.
Use the following checklists to ensure that vehicle
components are in good working condition before
each trip. Careful inspections eliminate stops later to
fix overlooked or forgotten items.
The checklists in this chapter can be copied and kept
as a record that the procedures have been com-
pleted. For details on how to inspect each item on
the checklists, see the corresponding procedure
(step number) in
Chapter 21 .
Checklists
NOTE: Checklists in this chapter correspond
with the procedures and steps in
Chapter 21 ,
Pre- and Post-Trip Inspections and Mainte-
nance
. Your vehicle may not be equipped with
all components listed below.
Daily Pretrip Inspection Checklists
See the following tables for a list of procedures that
should be performed daily, before the first trip. Place
a check mark in the complete (
Comp. ) column to
indicate a procedure has been performed.
Inspector Date
Suspension and Slack Adjusters Comp.
1 Suspension components
2 Slack adjusters
Wheels and Tires Comp.
1 Wheel covers
2 Tire condition
3 Tire inflation
4 Rims and wheel components
5 Wheel bearing oil seals and lubrication levels
6 Mud Flaps
Saddle Tank Areas Comp.
1
Drain air reservoirs (without automatic drain
valves)
2 Fuel tank(s) secure
3 Frame rails and crossmembers
4 Visible exhaust components
Engine Compartment Comp.
1 Leakage under engine
2 Air intake system
3 Engine oil level
4 Power steering reservoir level
5 Engine coolant level
6 Visible engine wiring
7 Frame rails
Cab Comp.
1
Reset dash-mounted air intake restriction
indicator
2 Air-pressure warning systems
3 Air governor cut-in and cut-out pressures
4 Air pressure build-up time
5 Air system leakage
6 Air pressure reserve
7 Mirrors, windows, windshield
8 Horn, windshield wipers, windshield washers
9 Heater and defroster
10 Interior lights
11 Exterior lights
12 Seat belts and tether belts
13 Fuel level
14 Mirror adjustment
15 Service brakes
16 Backup alarm
Natural Gas Fuel System Inspection Comp.
1 Fuel tanks
2 Required decals
3 Vent caps
4
Plumbing components, fuel fill fitting, fuel
lines
5
Fuel gauge components, LNG fuel tank
pressure
6 Coolant hoses
7 LNG fuel tank pressure
8 LNG vaporizer
Pre- and Post-Trip Checklists
20.1