Freggia OERD67, Руководство пользователя

Страница: 6 / 44

• A double pole switch with at least 3 mm between the contact points
between the device and the electric wire and suitable for carrying the
desired load in accordance with the laws in force must be installed if the
device is to be connected directly to the electric wiring. Ground wire must
not be cut be double pole switch.
• It is not advised to use adapters, multi plugs
or extension cords. If absolutely necessary,
adapters or extension cords in line with safety
laws can be used. However, never go beyond
the maximum current capacity and maximum
power stated for the adapter.
• Test heating elements for 3 minutes after the
connections are done.
• Electricity safety of the device is guaranteed only if connected to suitable
source correctly with grounding in accordance with the rules. Our company
cannot be held responsible for the damages to people, animals or
properties due to the failure to ground the device properly.
WHEN THE DEVICE IS INSTALLED INITIALLY
1. Set the Temperature Control to maximum level. (250 C MAX)
2. Set the Function button as Top and Bottom Grill (and + Fan if
available).
3. Run the oven in this setup for 30 minutes.
4. Open a window for air circulation.
• A smoke and smell resulting from insulation materials and heating elements
can be experienced for once during this period. If this happens, wait for the
smoke and smell to dissipate before placing food inside the oven.
• After these are done, clean the interior of the oven with a slightly wet soapy
soft cloth.
IMPORTANT: Always use the middle section of the handle when opening
the lid of the oven.
WARNING: Carefully wash parts such as tray, grid etc before the fi rst use
of the oven.
6
INSTRUCTION FOR INSTALLATION
INSTRUCTION FOR INSTALLATION
Open the door and fi x the oven with four wood screws which must be screwed
through the holes in the lateral jambs of the oven.
ELECTRICAL CONNECTION
• The device must be connected to the main electricity grid only by authorized
electricity technicians in accordance with the laws and regulations in force.
• Make sure that the power from the main grid is enough to supply the power
stated in the information tag placed on the front bottom of the device.
• If the current of fuse in your house is less than 16 Ampere, have a qualifi ed
electrician connect a 16 Ampere fuse.
WARNING:
The device must absolutely be grounded.
• Your oven includes a grounded plug mounted on the grid cord. This plug
must be used with a grounded line. Have a licensed electrician do the
grounding installation.
Before supplying electricity to the device:
1. Place the oven in a way to make reaching the plug used for electricity
connection or double pole switch easier.
2. Do not let the electricity cable touch hot surfaces when placed and
do not pin it to the oven lid.
3. Contact the nearest authorized service if the electricity cable is
damaged. Make sure authorized service makes the chance with
a new cable with plastic insulation at the same size and that can
withstand the electricity current the oven needs.