Freggia HCFI32B, Руководство пользователя

Страница: 7 / 64

7
DESCRIPTION OF THE APPLIANCE
USE OF THE APPLIANCE
VENTILATION
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories brought out by the
electronic system reach a certain level. The ventilation starts his high speed when the hob is intensively used. The cooling
fan reduces his speed and stops automatically when the electronic circuit is cooled enough.
STARTING-UP AND APPLIANCE MANAGEMENT
BEFORE THE FIRST USE
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks
causing blue-tinted colour on the glass surface.
INDUCTION PRINCIPLE
An induction coil is located under each heating zone. When it is engaged, it produces a variable electromagnetic fi eld
which produces inductive currents in the ferromagnetic bottom plate of the pan. The result is a heating-up of the pan
located on the heating zone.
Of course the pan has to be adapted:
•
All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron and steel pans,
enamelled pans, stainless-steel pans with ferromagnetic bottoms…
• Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware, …
The induction heating zone adapts automatically the size of the pan. With a too small diameter the pan doesn’t work.
This diameter is varying in function of the heating zone diameter.
If the pan is not adapted to the induction hob the display will show [ U ].
SENSITIVE TOUCH
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your fi nger presses the key, the
corresponding command is activated. This activation is validated by a control light, a letter or a number in the display
and/or a “beep” sound.
In the case of a general use press only one key at the same time.
STARTING-UP
You must fi rst switching on the hob, then the heating zone:
• START-UP/ SWITCH OFF THE HOB :
Action Control panel Display
To start
Press key [ ]
2 x [ 0 ]
To switch off
Press key [ ]
Nothing or [ H ]
EN