2201 Cantu Court Suite 215 Sarasota, FL 34232 Page 6 of 23
(941) 378-4242 (800-237-3928 Fax (941) 378-2765
Stewartsigns.com
Figure #7 “Serial Setup 2” Window (Building Unit)
4.
Configuring the “Radio Setup”. See figure #8.
a.
Click on
“Radio Setup”.
b.
Set the “Network Type” to “
Point-to-Point
”.
c.
Set the Modem Mode to “
Gateway
”.
d.
Click on “
Save/Apply
” to save your settings.
e.
Click on “
Call Book
” (near the bottom of the “Radio Setup” Window. This will
open the Call Book Window.
See figure #9.
f.
Call Book Window enter the serial number of the
OTHER
Transceiver in the
space provided in line 0. See figure #9. (The Serial Number of the Transceiver
can be found on the label attached to the Transceiver).
g.
Click on “
Save/Apply
” to save your settings.
h.
Click on
“Radio Setup”
to get back to the “Radio Setup Browser Window”
i.
Click on
“Save/Apply”
and then
“Reboot”
button for the
ALL
the changes to
take effect.
j.
Close all Browser Windows. This concludes the programming of the Transceiver
for your building.
