Freeview T2400, Важная информация

Страница: 27 / 76

27
5.2.1 Antenna
1.
Select Antenna Power type using the
◀
/
▶
buttons. Antenna Power is defaulted to Off, if the
antenna needs power supplied from receiver, you
can select Antenna Power value as „On‟. (for
external Masthead amplifiers).
Off is the default value in this option. If you have an internal distribution amplifier, you
should not enable this option.
5.2.2 Auto Scan
1.
The left window shows TV channels and the right
window shows Radio channels during the
scanning process. White channel names are new
channels downloaded to your receiver. Grey
channel names are already existing channels.
1.
Choose Auto Scan menu and press button to
begin scanning
2.
You can press Exit at any time to stop scanning.
A pop-up menu appears.
3.
If you allow the complete scan, the same pop-up
menu appears.
5.2.3 Manual Scan
1.
Set the desired values (see right) to scan. Use
the numeric keys (0-9) and
◀
/
▶ ▲
/
▼
buttons.
2.
Pre
ss the button to start the manual scan.